Junction box for connecting pulsemeter to control unit.
1 box for each electronic control unit.

Meter with single-channel pulse transmitter and 24 Vdc solenoid valve. It is connected close to every single fluid dispensing point.

Electronic control-unit with keypad and display for FLUID KEEPER system. 1 control-unit for every 4 fluid dispensing point.

Air-operated oil dispensing unit with digital meter for 208L drums, complete with hose reel, special wheeled trolley suitable for rough or bumpy surfaces, composed of:
-  3:1 ratio air-operated pump, mod. 31233
- Ring nut for fastening pump to drums, mod. 065420
- 4-wheeled trolley with grille, mod. 80792
- Flexible rubber hose (length 2m) 1/2” mod. 31002
- Spring-driven hose reel, mod. 37115
- 15m flexible hose, diam. 1/2”, reeled, mod. 31015
- Oil control gun with digital meter, mod. 15890.

Air-operated oil dispensing unit for 208L drums complete with hose reel and special wheeled trolley suitable for rough or bumpy surface composed of:
-  3:1 ratio air-operated pump, mod. 31233
- Ring nut for fastening pump to drums, mod. 065420
- 4-wheeled trolley with grille, mod. 80792
- Flexible rubber hose (length 2m) 1/2” mod. 31002
- Oil control gun with digital meter, mod. 15890.

Wall-mounted waste oil suction system composed of air-operated piston pump, set of probes of various diameters, 3m-long suction hose complete with tap and connections, vacuum gauge for suction control, 1.6m-long drain hose with hooked nozzle. Suitable for fluid suction / dispensing in centralized systems.

Wheel-mounted waste oil suction unit, capacity 24L, with sight tube showing fluid level, set of 5 probes of different diameters and plastic tool tray. Manual emptying of the tank.

Wheel-mounted waste oil suction unit, capacity 24L, with sight tube showing fluid level, set of 5 probes of different diameters and plastic tool tray. pneumatic emptying of the tank.

Wheel-mounted waste oil suction unit, capacity 80L, with sight tube showing fluid level, set of 5 probes of different diameters and plastic tool tray. Pneumatic emptying of the tank.

Tanks equipped for waste engine oil suction by means of a probe inserted into the dipstick tube. Tanks must be depressurized to 0.8 bar using a 7-10 bar compressed air connection. They can operate without the need for a continuous power supply. For the best results, we recommend draining at a minimum temperature of 60-80°C.