Pressure sprayers and foamers

per page

10 Item(s)

  1. Mobile pressure sprayer, composed of two-wheeled trolley with base for 20L plastic cans, 1:1 air-operated stainless steel piston pump, 10m polyurethane hose 8 x 12mm diam., rack for hose storage during transportation, spray gun and nozzle.

  2. Mobile foaming sprayer in SAE304 stainless steel, tank capacity 16 L, equipped with 7.5m spiral hose, spray gun and nozzle. SAE316 version available on request.

  3. Pressure Sprayers and foaming with stainless steel housing. Equipped with dispensing gun, nozzle for foamer and 10m hose.

    Compressed-air sprayers designed for mixing water with detergents and producing foam at low pressure. These systems are an alternative to the classic pressurized tank sprayers and provide the following performances:
    • Direct suction of detergent from the can, providing greater freedom of use
    • Pressurized containers not required
    • Accurate, settable and variable mixing of detergent and water by means of an intuitive and versatile control panel
    • Special function for satisfying foam production. The equipment comes in two versions: wall-mounted and wheeled.

    Use as sprayer:
    Mains water flows into the hydraulic circuit:
    the pump acts through a diaphragm located in the Venturi device, thus generating a sufficient decrease in pressure to suck up the detergent. The selected proportion of detergent then flows into the circuit. Using the controls, proportions from 0 to 10% can be accurately dosed.

    Use as foamer:
    A compressed-air-production device within the circuit, set using a pressure regulator and controlled by an on-off switch, adds compressed air to the water-detergent mixture to create foam.

  4. Mobile foaming sprayer in SAE304 stainless steel, tank capacity 40L, equipped with 7.5m spiral hose, spray gun and nozzle. SAE316 version available on request.

  5. Painted steel sprayer, tank capacity 24 l, equipped with 7.5 m lenght spiral shaped hose, gun and nozzle.

  6. Foaming sprayer in SAE316 stainless steel, 24L capacity. Complete with 5m polyurethane hose 8x12 mm diam., spray gun and nozzle.

  7. Foaming sprayer in SAE304 stainless steel, 24L capacity. Complete with 5m polyurethane hose 8x12 mm diam., spray gun and nozzle.

  8. Painted steel sprayer capacity 40 l, equipped with 7.5 m lenght spiral shaped hose, gun and nozzle.

  9. Mobile foaming sprayer in SAE304 stainless steel, with 40L capacity tank equipped with level gauge, 5m polyurethane hose, spray gun and nozzle. SAE316 version available on request.

  10. Mobile nebulizer in SAE304 stainless steel, with 40L capacity tank equipped with level gauge, 5m polyurethane hose, spray gun and nozzle. SAE316 version available on request.

per page

10 Item(s)

Compare Products

You have no items to compare.

SIGN UP FOR Newsletter

Sign up for our new letter for exclusive updates on contests, new products, and more.