SAE 100 R2 AT rubber hose for high-pressure use, with straight female BSP-thread connections.Suitable for grease pumping, to be assembled together with pumps and/or hose reels.
- Inner lining and cover of hose: synthetic rubber resistant to grease, oil and diesel.
- Reinforcement: 2 wire braids made of high-resistance steel.
Lenght 1 m
Greasing station with forced greasing system using a pneumatic circuit. For use when dealing with particularly viscous grease (hard to pump either because of its nature or because of low temperatures).
Complete system for 60kg drums.
Composed of:
- Pneumatic pump - Drum cover
- 3m of 1/4” rubber hose
- Follower plate
- Gun with hose and coupler
- Pressure regulator
- Triple articulated joint.
Pneumatic system features
Continuous pressure 1-3 bar
1 bar = 50kg thrust
Air-operated pump features
Input pressure: 2-8 bar
Compression ratio 50:1
Greasing station with forced greasing system using a pneumatic circuit. For use when dealing with particularly viscous grease (hard to pump either because of its nature or because of low temperatures).
Complete system for 30kg drums.
Composed of:
- Pneumatic pump - Drum cover
- 3m of 1/4” rubber hose
- Follower plate
- Gun with hose and coupler
- Pressure regulator
- Triple articulated joint.
Pneumatic system features
Continuous pressure 1-3 bar
1 bar = 50kg thrust
Air-operated pump features
Input pressure: 2-8 bar
Compression ratio 50:1
Greasing station with forced greasing system using a pneumatic circuit. For use when dealing with particularly viscous grease (hard to pump either because of its nature or because of low temperatures).
Complete system for 180 kg drums.
Composed of:
- Pneumatic pump - Drum cover
- 3m of 1/4” rubber hose
- Follower plate
- Gun with hose and coupler
- Pressure regulator
- Triple articulated joint.
Pneumatic system features
Continuous pressure 1-3 bar
1 bar = 50kg thrust
Air-operated pump features
Input pressure: 2-8 bar
Compression ratio 50:1
Trolley for 180/200kg drums with 4 special rubber wheels designed for use on rough surfaces. Comes complete with spillage grate and ready fitted for attaching a hose reel mod. 37115.
Greasing kit for 180/200kg drums, composed of:
- Pneumatic pump mod. 81880
- Automatic hose reel mod. 37115
- 15m of 1/4” rubber hose, mod. 81015
- Drum cover diam. 600 mm, mod. 80580
- 3m of 1/4” rubber hose, mod. 81003
- 4-wheeled trolley with grid mod. 80792
- Follower plate diam. 590 mm. mod. 80684
- Grease control gun with hose and coupler, mod. 88410
- Pressure regulator, mod. 40400
- Triple articulated joint, mod. 88442.
Follower plate with rubber membrane, available in different diameters to adapt on different models of drums, used to keep the grease levelled and to avoid any cavitation in a suction zone and grease residuals on internal wall drum.
Follower plate with rubber membrane Ø 590 mm ( For drum capacity 180 kg )
You have no items to compare.
Sign up for our new letter for exclusive updates on contests, new products, and more.