“OIL-BIT PLUS” digital oval gear flow meter with automatic non-drip oil control gun, 16mm Ø extension and inlet swivel. With trigger guard and rubber cushioning.

“OIL-BIT PLUS” digital oval gear flow meter with gun, 12 mm Ø extension, automatic non-drip nozzle and 1/2” BSP inlet swivel. With trigger guard and rubber cushioning. Digital oil meter with oil viewer.

“OIL-BIT PLUS” digital oil meter oval gear with gun, trigger guard and rubber cushioning. Digital oil meter with flexible extension and manual non-drip nozzle with screw shut-off.

“OIL-BIT PLUS” digital oval gear flow meter with gun, trigger guard and rubber cushioning. Digital oil meter with flexible extension bent to 80° and automatic non-drip nozzle.

Kit to fit on hand-operated pumps for transfer and metering using an Oil-Bit Plus meter.

“OIL-BIT PLUS” digital oil meter suitable for in-line use or attachment to oil control gun. 1/2” BSP connections.

OIL COUNTER EVOLUTION APPROVED

Power supply: 2 x AA alkaline batteries 1.5V.
Display: liquid crystal with display of different units of measurement (Litres-Gallons-Pints-Quarts).
Data storage: permanent storage of up to 2000 batches, with time references. The operator can reset individual batch totals, but cannot tamper with the cumulative totalizer.
Data recorded by the flow meter:
• sequential number of the single distribution;
• year, month, day and hour of the individual batch;
• quantity of the individual batch;
• total quantify discharged by the flow meter up to that moment.

EVOLUTION CERTIFIED. 
EVOLUTION is the latest version of the Oil Counter Approved flow meter, made by Ompi to enable the dispensing and approved metering of industrial lubricating oils.
Conforming to the standards MID-MI005 and OIML 117-1, EVOLUTION has an IP 64 protection rating.
It can be used with different units of measurement, and with either fixed or mobile workstations.

ESCLUSIVE SEALING FOR UNBEATABLE PRECISION.
EVOLUTION is designed to give you the maximum assurance that the total count of the fluids dispensed cannot be tampered with: the flow meter, after being set by Ompi, is irrevocably closed by lead-sealing the screws.
Nevertheless, individual batch counts can be reset.
The device is gauged for the measurement of industrial lubricating oil; for the viscosity grade of each type of oil, see the metrological table on the front panel.

  MID MI005 APPROVED CATOLOGUE

Digital oil meter dispenser gun OIL COUNTER with ø 12 mm rigid hose, automatic no-drip nozzle

“OIL-COUNTER plus” digital oval gear meter with gun, 12 mm Ø rigid extension, automatic non-drip nozzle and inlet swivel.

  SCHEDA CATALOGO