Dual-function wheel-mounted waste oil suction tank and oil drain, 80L capacity, with 10L painted steel pan, sight tube showing fluid level, set of 6 probes of different diameters and plastic tool tray. Pneumatic emptying of the tank.

Dual-function waste oil evacuation systems allowing oil to be collected using gravity or by means of suction through a probe inserted into the dipstick tube of the vehicle’s engine oil tank. Tanks must be depressurized to 0.8 bar using a 7-10 bar compressed air connection, after which no power supply is required. In order to obtain the best results, we recommend draining at a minimum temperature of 60-80°C.

Dual-function wheel-mounted waste oil suction tank and oil drain, 80L capacity, with 10L inspection chamber, 10L painted steel pan on a pantograph arm, suitable for the collection of lubricating fluid from cars and motorbikes, sight tube showing fluid level, set of 5 probes of different diameters and plastic tool tray. Pneumatic emptying of the tank.
The inspection chamber allows the operator to check the quality and the quantity of the evacuated oil. To ensure a clear view over time, the inspection chamber is equipped with an internal cleaning system which allows the chamber to be cleaned by sucking in a small quantity of diesel or any other non-aggressive detergent.

Triple-function tanks equipped for collecting waste engine oil by draining either from a vehicle raised on a lift or on the floor using a pan on a pantograph arm or by using the Venturi method of pressure reduction through a probe inserted into the dipstick tube of the vehicle’s engine oil tank. Tanks must be depressurized to 0.8 bar using a 7-10 bar compressed air connection. After that they can operate without the need for a continuous power supply. For the best results, we recommend draining at a minimum temperature of 60-80°C.

Dual-function wheel-mounted waste oil suction tank and oil drain, 80 L capacity, with 10 L inspection chamber, air-operated piston pump, 10 L painted steel pan, sight tube showing fluid level, set of 5 probes of different diameters and plastic tool tray. Pneumatic emptying of the tank.The inspection chamber allows the operator to check the quality and the quantity of the evacuated oil. To ensure a clear view over time, the inspection chamber is equipped with an internal cleaning system which allows the chamber to be cleaned by sucking in a small quantity of diesel or any other non-aggressive detergent.

Dual-function wheel-mounted waste oil suction tank and oil drain, 80L capacity, with air-operated piston pump, 10L painted steel pan, sight tube showing fluid level, set of 5 probes of different diameters and plastic tool tray. Pneumatic emptying of the tank.

Wheel-mounted waste oil suction unit, capacity 80L, with sight tube showing fluid level, set of 5 probes of different diameters and plastic tool tray. Pneumatic emptying of the tank.

Tanks equipped for waste engine oil suction by means of a probe inserted into the dipstick tube. Tanks must be depressurized to 0.8 bar using a 7-10 bar compressed air connection. They can operate without the need for a continuous power supply. For the best results, we recommend draining at a minimum temperature of 60-80°C.

Wheel-mounted waste oil suction unit, capacity 24L, with sight tube showing fluid level, set of 5 probes of different diameters and plastic tool tray. pneumatic emptying of the tank.

Wheel-mounted waste oil suction unit, capacity 24L, with sight tube showing fluid level, set of 5 probes of different diameters and plastic tool tray. Manual emptying of the tank.

Wall-mounted waste oil suction system composed of air-operated piston pump, set of probes of various diameters, 3m-long suction hose complete with tap and connections, vacuum gauge for suction control, 1.6m-long drain hose with hooked nozzle. Suitable for fluid suction / dispensing in centralized systems.

Kit for use with 18/25 kg drums, composed of:
- Hand-operated pump;
- Grease control gun with mode selector;
- 1.5m of ½” flexible hose;
- 330mm diam. drum cover in painted metal;
- Rubber-edged follower plate.

GREASE POWER 750 is a hand-operated greasing kit composed of a spring-loaded pump which feeds a booster gun able to reach pressures up to 750 bar. This system can be used in 3 different ways to obtain the following results:
1) Delivery of 0.3g of grease at 750 bar each stroke. To clear clogged or seized-up grease nipples.
2) Delivery of 1.1g of grease at 130 bar each stroke. For normal greasing operations.
3) A continuous, low-pressure flow of grease can be obtained by keeping the gun trigger pressed and working the pump lever.

Thanks to its compact size and freedom from any electrical or pneumatic hook-ups, this mobile grease pump is perfect for all kinds of applications in the field of lubrication.