Dual-function wheel-mounted waste oil suction tank and oil drain, 80L capacity, with 10L painted steel pan, sight tube showing fluid level, set of 6 probes of different diameters and plastic tool tray. Pneumatic emptying of the tank.

Dual-function waste oil evacuation systems allowing oil to be collected using gravity or by means of suction through a probe inserted into the dipstick tube of the vehicle’s engine oil tank. Tanks must be depressurized to 0.8 bar using a 7-10 bar compressed air connection, after which no power supply is required. In order to obtain the best results, we recommend draining at a minimum temperature of 60-80°C.

Dual-function wheel-mounted waste oil suction tank and oil drain, 80L capacity, with 10L inspection chamber, 10L painted steel pan on a pantograph arm, suitable for the collection of lubricating fluid from cars and motorbikes, sight tube showing fluid level, set of 5 probes of different diameters and plastic tool tray. Pneumatic emptying of the tank.
The inspection chamber allows the operator to check the quality and the quantity of the evacuated oil. To ensure a clear view over time, the inspection chamber is equipped with an internal cleaning system which allows the chamber to be cleaned by sucking in a small quantity of diesel or any other non-aggressive detergent.

Triple-function tanks equipped for collecting waste engine oil by draining either from a vehicle raised on a lift or on the floor using a pan on a pantograph arm or by using the Venturi method of pressure reduction through a probe inserted into the dipstick tube of the vehicle’s engine oil tank. Tanks must be depressurized to 0.8 bar using a 7-10 bar compressed air connection. After that they can operate without the need for a continuous power supply. For the best results, we recommend draining at a minimum temperature of 60-80°C.

Grease control gun with steel body with trigger guard, complete with flexible extension and 4-jaw coupling.

Grease control gun with steel body, complete with rigid extension, 4-jaw coupling and trigger guard.

Grease control gun with steel body, complete with rigid extension and 4-jaw coupling.

Grease control gun with steel body, complete with flexible extension and 4-jaw coupling.

71730 model: oil control gun with digital meter, allows accurate and quick metering of large volumes of oil.

“Grease Gate” series digital oval gear meter with preset function: the flow stops automatically when the set value has been reached. Complete with gun, rigid extension and 4-jaw coupling. The meter can also be calibrated by the user.

Digital oval gear meter for metering of grease during transfer operations. Grease control gun and 16mm diam. flexible rubber extension with rigid tip bent to 90° included. The meter can also be calibrated by the user.